FT NEWS

Looking for some bright ideas on how to choose a chandelier? Consider these tips for selecting a fixture that suits the proportions of your room and the style of your home.

How to pick the diameter of your chandelier
When choosing a chandelier for most spaces, one general rule of thumb will give you a good guide on choosing a size:

Width of room (in feet) + length of room (in feet) = diameter/width of chandelier (in inches).

So, for example, if your room is 14 feet long by 10 feet wide, a 24-inch diameter chandelier would look proportionate (14 feet + 10 feet = 24 feet, which you convert to inches).

This is a common rule that helps you keep the scale of your chandelier in proportion to the size of the room. To me, this rule is best used as a starting place and not as a hard and fast rule, but it definitely helps set a minimum size.

If your light will be centred on a seating area and not the entire room, use the approximate length and width dimensions of that area instead of the entire space. Another way to calculate this is to add the length the light will be from the two closest walls and then double it to get your approximate chandelier diameter in inches.

For example, if the centre of your seating area is 7 feet from one wall and 8 feet from the other, then 7 feet + 8 feet = 15 feet; 15 feet x 2 = 30 feet, which you convert to inches. So a 30-inch-diameter fixture would be a good fit.

How to pick the vertical dimensions of your chandelier
Now that you have the width and diameter of the fixture, you’ll want to choose the vertical dimensions of the fixture (not the height above the ground just yet, but the actual top-to-bottom size of the unit itself).

To choose the vertical dimension of a chandelier, the classic rule is to take the room height (in feet) and multiply it by 2.5 to 3 to get a good range (in inches) for the vertical proportions of the light.

So if your room has an 8-foot ceiling, this would mean your chandelier should be roughly 20 to 24 inches top to bottom. (8 feet x 2.5 = 20 feet; 8 feet x 3 = 24 feet. Convert to inches to get 20 to 24 inches.)

For a 10-foot ceiling, 25 to 30 inches will be a better proportional fit. (10 feet x 2.5 = 25 feet; 10 feet x 3 = 30 feet. Convert to inches to get a range of 25 to 30 inches). And the taller the room, the more you can err on the high side of that formula.

As for the height you hang the chandelier above the floor, you’ll want to go at least 6 feet 6 inches so that nobody is likely to bump their head. A standard of 7 feet above the floor works for most spaces with a ceiling higher than 8 feet.

If you do the math, however, with a standard 8-foot ceiling, you cannot fit a 20- to 24-inch light at this height to follow the previous rule. For this reason, and because so many modern chandeliers do not use the same sorts of shapes as traditional chandeliers, I would say you can safely throw the 2.5- to 3-times height rule out and focus primarily on the width if your situation demands it.

For spaces with very tall ceilings, hang the light at 8 feet above the floor (plus an additional foot if the room is taller than 12 feet). You can also look to lights that hang in tiers to fill the height well while also landing low enough to help make the space below feel more intimate.

In an entryway with a more normal-height ceiling, keep in mind that a light fixture will have to avoid the door swing. Centring a light on the entry vestibule can be beautiful, but you may want to choose a petite pendant or a flush-mount instead of a true chandelier to avoid any collisions.

Dining rooms
A chandelier over a dining table has some special considerations. First, it should be low enough to create an intimate atmosphere but still not in anyone’s way. Hanging it with the bottom 30 to 34 inches above the table is a good rule. And make sure it doesn’t extend wider than the table – at least not any portions that are low enough for someone to bump their head.

Lengthwise, a chandelier will ideally be one-half to two-thirds of the length of your table to create a nice balance of proportions.

If you’re using a modern style of chandelier in a thin linear or branching shape, choose one two-thirds to four-fifths the length of the table so it doesn’t look too small to hold its own.

For a round dining table, choose a round or square fixture one-half to two-thirds the width of the table all the way around. If the light is too wide it will likely make the table look small and awkward, and if it’s rectangular the pieces will likely look disconnected.

For a small round table (say, a 48-inch table in a breakfast nook) a light can be more on the petite side without looking off, so feel free to choose something smaller and keep the look a little lighter if you prefer.

Dramatic versus demure
Keep in mind when sizing a light that size isn’t the only issue; you should also consider the other decor in the room. For a room with rich wallpaper or other busy patterns, a chandelier with intricate detailing will look appropriate.

In a more subdued space with lots of white walls or neutrals, a simpler, smaller light fixture will be more fitting.

Exaggerated scale
The rules and tips I’ve listed up to this point are great for choosing a fixture that follows classic proportions. However, a recent lighting trend has been to buck these classic proportions and choose oversize fixtures instead to make a calculated statement through the sheer drama of large scale.

Hanging light fixtures make for a natural focal point already, due to their central position in the space and the simple fact that they emit light, so it makes sense to play up their size a bit if you really want them to make people say “wow.”

Of course, the scale of a light must still make sense for the space it is in, but throwing caution to the wind and choosing a somewhat larger fixture instead of playing it safe can lead to eye-catching results.

Airy minimalism
Taking a different approach from overscale lights, another huge trend we’re seeing is airy lighting that may technically be large in diameter but includes a great deal of negative space for a breezy, open vibe.

Sometimes the best way to make people listen is to whisper, and sometimes the best way to make a visual statement is by using a fixture that is so minimal or airy that you can’t help but notice. Lighting like this is made all the more accessible by the continuing evolution of LED technology, which allows for continuous curves and other streamlined silhouettes that could never be re-created by a traditional bulb.

Lights in this trend are almost more empty space than actual light, which allows them to be installed in a large size without appearing heavy or interrupting a room. This is especially important in breezy spaces with lots of bright white and windows, creating a peaceful atmosphere.

Muted gold
While warm-toned metallics continue to be a huge trend, what we’re seeing work best in many homes is a softer form of gold that isn’t so “blingy” and is a bit more demure. “Softer” can mean various things, from an antiqued finish to a subtle brass tone that isn’t as boldly yellow as true gold. Either way, the hue of the metal is kept subtle so as not to appear gaudy or flashy, opting for a more timeless sophistication.

Also popular are fixtures with thin elements of golden metallics, so the material is present but not overwhelming. This works especially well in spaces that pick up a similar metal tone elsewhere, such as in small accessories, frames or even fun, trendy golden cutlery.

Sculptural appeal
You can use a basic light fixture to illuminate an artistic element in your home, or you can let a light fixture be the piece of art. Light fixtures that appear like a sculptural installation are trendy right now but also timeless, like any great art.